The Heat Transfer Area Rake Dryer For Low Temperature Material Drying

Overview of the product of a vacuum rake dryer:

The vacuum rake dryer is also called a rake vacuum dryer. It is a dynamic conductive vacuum drying device. As the vacuum rake dryer application extends, a series of special variable equipment has been produced. , Vacuum paddle dryer dryer, vacuum snail belt dryer, etc. The vacuum rake dryer uses two types of heating method of heating with a jacket and a clip of the clip, and the rake arm. It is suitable for the drying and solvents of loose materials that need to be reunited in vacuum conditions and dry materials under the drying process. Recycling process.

Working principle of vacuum rake dryer:

The drying material is added from the top of the shell. When the continuous rotating rake teeth are stirred, the surface is continuously updated when the material is in contact with the wall of the shell. Make dampness in the material, and the dampness of vaporization is pumped away from the vacuum pump in time. Due to the high vacuum operation, the solvent boiling point is greatly reduced, and the water steam pressure of the surface of the dry material surface is much greater than the water vapor pressure in the dry shell body. This is conducive to the discharge of water and surface moisture inside the material. After completing the operation, turn off the vacuum valve, break the vacuum, open the vacuum output valve in the lower part of the device, and remove the material.

Equipment features of vacuum rake dryers:

1. The material is dry and uniform; avoid oxidation and overheating; you can get a product with extremely low wet content. You can pack it without crushing operation.
2. High evaporation intensity, generally 15-60kg (water)/m2? H.
3. Without air intervention, the condenser is very small, which is convenient for recycling material solvents.
4. The solvent steam band is discharged after filtering the filter, and there is no pollution to the environment.
5. Low energy consumption, generally 1.3-1.5kg of water steam is required to evaporate 1kg of water.
6. Thermoshi can use water steam, hot oil, and hot water.

Low Temperature Rake Dryer

Low Temperature Material Drying Rake Dryer

Large Heat Transfer Area Rake Dryer

The Heat Transfer Area Rake Dryer For Low Temperature Material Drying Images